Nuvo NV-T2DF User Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 25
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
Back Panel
1. Antenna Input: Coax “F” connector brings in the signal input from the NuVo NV-T2PAS antenna (pg. 10).
2. Aux. Input: This stereo RCA connector is enabled through the advanced menu options (pg. 14), and allows an additional
audio source to be connected and accessed through the tuner source selection.
3. Audio Output: A Stereo RCA output allows the tuner audio signal to be connected to an amplifier source, such as the NuVo
Simplese, Essentia, and Concerto audio distribution systems.
4. Trigger ON: The voltage output provides a constant 12 volts when the Tuner is turned on.
5. Audio Output: This is a second stereo output designed to work with a tip, ring, sleeve 3.5mm stereo connection.
6. IR Pass-Thru: This 3.5mm connection is used to link IR control between two or more components used in the same
installation.
7. IR Input: The single IR Input accepts a mono 3.5mm patch cable for receiving IR information from an external IR receiver
without the use of an external IR emitter.
8. NuVoNet In: This RJ45 connection is used with one of the Peripheral Device inputs on the Concerto EZ Port (see pg. 17) to
enable direct one-to-one communication with the Concerto Display Pads.
9. NuVoNet Out: This RJ45 jack is used to link the NuVoNet communication between multiple NuVo Peripheral Devices such as
the T2 Tuners in a single installation.
10. USB: The USB port is used for downloading a configuration from your computer (see pg. 17).
11. RS232: This 9-pin DB9 connection allows serial communication with an external RS232 system. This may also be used for
downloading a configuration from your computer.
12. AC Power: This connects the T2 with an AC power source. When plugged into a live AC outlet the blue power LED (Light
Emitting Diode) on the T2's front panel will remain lighted. When neither tuner is on, the T2 is in standby mode and draws
less than 2 watts of power.
L
OUTAUX IN
R
TRIGGER
ON=+12V
AUDIO
OUTPUT
TUNER B TUNER A
L
OUT
R
AUDIO
OUTPUT
IR PASS-THRU
IR INPUT
NuVoNet
OUTIN
USB
RS 232
ANTENNA INPUT
IN
SYSTEM
USE ONLY NuVo
NV-T2PAS
POWERED ANTENNA SYSTEM
TRIGGER
ON=+12V
AUX IN
Model NV-T2FX
FM/AM/WX-XM Tuner
NuVo Techonlogies LLC
Cincinnati Ohio USA
www.nuvotechnologies.com
MADE IN CHINA
3033118
T
R
E
E
T
K
N
I
T
R
E
E
T
K
N
I
CM
90~264V 50~60Hz 15W
1
2
3
4
5
6
7
8
9
10
11
12
Page 6
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 24 25

Comments to this Manuals

No comments