Nuvo NV-P2100 User Manual download pdf (Page 9)

Voltage Trigger

This input is designed for a mono 1/8" plug to accept a

trigger voltage coming in from an external source.

Fig. 4.

Fig. 4

Any voltage ranging from 3 to 30 volts AC or DC will

cause the amplifier to turn on when the POWER MODE

switch (fig. 3C) is in the AC/DC mode.

Unit On

This output provides a constant 12 volts DC when the

amplifier is powered on. This is useful for powering on

external equipment with the P2100 Fig 5.

Fig. 5

Speaker Output

The P2100 provides 100 watts of output power per

channel at 4 ohms. It uses a modular plug that will

accept up to 14 gage, four conductor, speaker wire.

Stranded Four conductor sixteen gage wire is recom-

mended Fig 6.

Fig. 6

The NV-P2100 amplifier is designed to run at a maxi-

mum load of 4 ohms. Prolonged operation at less than

4 ohms could cause the amplifier to overheat and do

damage to its internal components. Overheating the

amplifier due to an excessive load will void the war-

ranty.

CONTROL

UNIT

+12VDC

100mA

VOLTAGE

TRIGGER

3-30 VOLTS

AC OR DC

ON/OFF SWITCH

AUDIO AC/DC

POWER

MODE

CONTROL

UNIT

+12VDC

100mA

VOLTAGE

TRIGGER

3-30 VOLTS

AC OR DC

ON/OFF SWITCH

AUDIO AC/DC

POWER

MODE

CONTROL

SPEAKER

OUTPUT POWER

8 OHM: 70W X 2

4 OHM: 100W X 2

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Nuvo NV-P2100 User Manual Page 9

Comments to this Manuals

Related products and manuals for Musical Equipment Nuvo NV-P2100